Serving Southern New Hampshire, Middlesex and Essex Counties Massachusetts
Before | After |
---|---|
This home in Bedford, NH was dealing with water seeping into the basement. With nothing in place to remove the water, the basement was becoming damp and uncomfortable. Erickson Foundation Supportworks installed a sump pump and drainage system to capture and remove all the water.
Before | After |
---|---|
The front section of this garage was cracked in several locations and sinking. The homeowner needed to have the cracks sealed, and opted for PolyLEVEL to lift and stabilize the concrete slab.
Before | After |
---|---|
This homeowner in Bedford, New Hampshire was closing on their home and needed to fix some cracks in the basement and the garage. They called Erickson to fix the cracks. Design Specialist Brian Allen came to the house to inspect the cracks. He found that the cause of the cracks was from the wall starting to bow. He thought the best option was to install PowerBrace so that new cracks couldn't form. Crew Lead Jon Provost and his team installed the PowerBrace to permanently immobilize the wall. After the wall was immobilized the cracks were sealed.
The homeowners were happy to know that there are no cracks anymore and that the PowerBrace would prevent more from happening.
Click the icons to see what our customers had to say.
Erickson Foundation Solutions is your leading home repair contractor for your Bedford home. We strive to be the industry-leading home improvement company with high-quality products and expert technicians. Water in the basement or crawl space leads to mold, rot, musty odors, and structural issues. It also leads to a reoccurring headache for you. Luckily, our trained experts are available to fix the problem permanently. Erickson Foundation Solutions is your leading basement waterproofing company for your Bedford home. We employ expert technicians to install our patented, state-of-the-art products.
Having a leaky basement can be costly but is a preventable issue for homeowners living in Bedford. Basements that are not properly sealed can cause foundation problems, rotting columns or joists, excessive dampness in your home, and other issues that impact your home's safety and health. The experts at Erickson Foundation Solutions are here to help you say goodbye to leaky basements and keep your basement dry for years to come. Our technicians will inspect your basement and apply comprehensive solutions to your basement problems, including cleanup, odor, mold, and mildew.
If you are experiencing a leaky basement, don't wait until the problem worsens; call the experts at Erickson Foundation Solutions today.
Your crawl space is an excellent place for storing extra things, but it's also an invitation for moisture. As moisture grows, your crawl space can develop odors, mold, and pests if it isn't sealed or taken care of correctly. Erickson Foundation Solutions offers complete crawl space repair, sealing, and encapsulation systems that transform your musty, dirty crawl space into the space you envisioned it.
Erickson Foundation Solutions is a member of the CleanSpace Network, providing you with the best in crawl space encapsulation, repair, and sealing using industry-leading products, including
Contact Erickson Foundation Solutions for a free crawl space encapsulation estimate in Bedford and nearby today!
Foundation problems get more serious and expensive over time, especially as the underlying cause worsens. Shifting soils, settling, seismic activity, and moisture creeping beneath can severely damage your home's foundation. This can result in visible damage throughout your home, including bowing or cracked walls, uneven floors, and jamming doors and windows. The foundation repair experts at Erickson Foundation Solutions will inspect and identify the source of your structural foundation problems, even if you don't have a basement, so that they can develop the best plan of action to repair it.
Soil settlement can also affect your concrete the same way it does your foundation, causing it to crack and become uneven. Erickson Foundation Solutions offers complete concrete repair systems that withstand harsh weather conditions to stabilize and support your concrete permanently. Making necessary repairs and scheduling regular maintenance can prevent the need for total concrete replacement, saving you time and money in the long run.
Call the specialists at Erickson Foundation Solutions today to find long-term solutions for your foundation and concrete problems. Book your free estimate!
If you need expert home repairs and maintenance, including basement waterproofing, foundation repair, concrete repair, and more, using only the top-rated industry products, call the trusted team at Erickson Foundation Solutions. They offer free estimates for all of their services. Call or click to schedule now!
At Erickson Foundation Solutions, we recently wrapped up an impactful basement waterproofing project for a homeowner in Bedford, NH. The homeowner was grappling with two major concerns: a lack of adequate storage space and an ongoing battle with mold, all due to unwelcome water intrusion in their basement. Realizing the severity of the issue, which not only impacted the usability of their home but also the health and comfort of their living space, they reached out to us for a dependable solution.
Kickstarting the process, our Customer Care team promptly arranged an inspection appointment. System Design Specialist Bryan Barnard from our Sales Team took the reins, conducting a thorough home inspection. The diagnosis pointed towards the necessity for a robust waterproofing system. We recommended the installation of our proven WaterGuard, UltraSump System, and IceGuard products as a comprehensive remedy that would address the issue head-on. Our production team, composed of skilled foreman Gunther Billhardt and dedicated installers, set to work with a focus on efficiency and minimal disruption. The WaterGuard system provided an exceptional drainage solution, channeling unwanted water away, while the UltraSump pump system ensured any water entering the basement was effectively pumped out, keeping the basement dry year-round. The inclusion of IceGuard meant the system remained fully functional, even in the frozen winter months, preventing backups.
The transformation was evident. Upon completion, the homeowner's concerns about storage space and mold were resolved. The basement was now a dry, mold-free environment, granting peace of mind and a newly viable space for storage or even livable square footage. This project underscores our dedication at Erickson Foundation Solutions to not only meet but exceed homeowner expectations by delivering on our commitment to provide reliable, lasting solutions, and ensuring a remarkable customer experience throughout the entire process.
Recently, we had the pleasure of helping a homeowner in Bedford, NH, tackle a problem that many of us have experienced at one point or another – cold floors. This might sound like a minor inconvenience to some, but during those chilly months, it can really affect the comfort of your home. Here's the catch, the source of the problem wasn't poor insulation in the walls or old windows; it was their crawlspace.
After reaching out to us, we scheduled a time for a home inspection to get a closer look at the root of the issue. When our System Design Specialist Bryan Barnard visited the home, he discovered that the crawlspace underneath was not properly sealed or insulated, allowing cold air to permeate the flooring above. This was the moment of truth, where we presented our recommended solution – the installation of CleanSpace. CleanSpace is a fantastic product that essentially creates a vapor barrier, encapsulating the crawlspace to prevent moisture from seeping in, but most importantly, in cases like this, it helps to keep the cold air out. Our production team went to work, carefully installing CleanSpace throughout the entire crawlspace. The job was a textbook example of professionalism and efficiency, as our team not only installed the product but made sure the entire area was clean and tidy before leaving.
The outcome? Well, it was exactly what we aim for in every job. The homeowner immediately noticed a difference. The once cold floors were now comfortably warm, making their home feel more inviting and cozy. For us at Erickson Foundation Solutions, hearing that our solution not only fixed the problem but also significantly improved the homeowner’s daily life was a wonderful reminder of why we do what we do.
Recently, a homeowner in Bedford, NH, reached out to us with a rather unique problem— their gorgeous granite pool wasn't holding water. This wasn't just a minor leak; there were significant voids surrounding the pool, undermining its stability and preventing it from retaining water. Understandably, this situation was anything but ideal, especially considering the pool's value, both as a home amenity and a personal joy for the homeowner.
After the homeowner contacted our Customer Care team, we scheduled an inspection to understand the extent of the issue firsthand. Our System Design Specialist Victor Tapia quickly diagnosed the problem: the voids surrounding the pool needed to be filled and the entire area stabilized to ensure the pool could hold water effectively again. The recommended solution? Our tried-and-true PolyLevel technology. PolyLevel involves a precise, controlled lifting, and stabilization technique designed to handle precisely this kind of challenge. By injecting this high-density foam underneath and around the pool, we were able to fill the voids completely and stabilize the pool's foundation without the mess of traditional mudjacking or the invasiveness of concrete replacement. The day of the repair, our production team, comprising seasoned foreman Tyler Oslizlo and skilled installers, set to work. They meticulously pumped the PolyLevel foam in the critical areas, carefully monitoring the void fill and pool lift to ensure everything was perfectly leveled and stabilized.
Before long, the pool was no longer a leaking void but a fully functional, water-holding centerpiece of the homeowner's backyard once more. This job was a rewarding example of our mission in action: providing not just a service, but a remarkable experience resulting in reliable, long-lasting solutions for homes—and in this case, pool problems.
When a homeowner in Bedford, NH, was faced with the frustration of a faulty sump pump, they reached out to us for help. Their previously installed system just wasn't doing its job, leaving them anxious every time a storm rolled in. Understanding how critical a fully functional basement waterproofing system is, we were ready to step in and provide a dependable solution.
First off, our meticulous process kicked into gear with an initial contact from our friendly Customer Care team who arranged a comprehensive home inspection. Our skilled System Design Specialist Josh Phillips visited the property to diagnose the underlying problem precisely. It was clear that the existing sump pump system needed an overhaul, and it gave us the perfect roadmap to address the issue effectively. To get things back on track, we introduced the UltraSump System, renowned for its reliability, especially during power outages, thanks to its integral battery backup feature. We also equipped their basement with an IceGuard on the exterior discharge line, ensuring that even in the coldest temperatures, melting water could exit without blockage or backup. The actual work began with installing a feed line from the problematic old sump pump to a freshly installed basin. After securing the system's functionality, the old basin was buried under a fresh layer of concrete, seamlessly integrating our solution with their basement's layout. The production team, comprising punctilious foreman Nick Carelli and highly skilled installers, ensured the entire process was smooth, leaving the place tidy and the homeowner relieved.
The outcome was more than just an installed product; it was peace of mind restored for the homeowner, knowing they had a resilient and robust waterproofing system that could withstand the challenges of severe weather without a hitch.
Recently, at Erickson Foundation Solutions, we had the opportunity to help a homeowner in Bedford, NH, who was facing a common yet often overlooked problem: a poorly insulated crawl space. Before contacting us, they noticed that their home's energy efficiency was not up to mark, and certain areas of the house were receiving inconsistent temperatures, which was quite bothersome during the seasons' change.
Upon reaching out, our Customer Care team quickly set up an appointment for a complete home inspection to pinpoint the root cause of their discomfort. Our System Design Specialist Josh Phillips visited the home, assessed the situation, and recommended the installation of our SilverGlow insulation in their crawl space. SilverGlow is not just any insulation; it’s designed to keep the crawl space dry and energy-efficient, optimizing the overall comfort and air quality of the home. Once the homeowners decided to move forward with our suggestion, our production team came into play. First, they carefully installed an entrance to the crawl space to ensure easy accessibility. Then, with precision and attention to detail, they installed the SilverGlow insulation. The process required meticulousness to ensure the insulation was applied thoroughly, covering every nook and cranny to prevent any energy leaks.
The outcome was immediately noticeable. Our team not only enhanced the energy efficiency of the home but also helped in stabilizing the temperature throughout, making each room more comfortable. The homeowners were delighted with the result, impressed by the significant improvement in their home's comfort and potential energy cost savings. At Erickson Foundation Solutions, this is what we live for: providing a reliable, long-lasting solution and a remarkable customer experience.
Recently, in Bedford, NH, we were approached by a homeowner facing a troubling issue in their basement. They previously had WaterGuard installed in parts of their basement for waterproofing, but unfortunately, it didn't encompass the entire perimeter. Over time, water started making its way through the unprotected sections, leading them to reach out to us at Erickson Foundation Solutions.
Our team immediately knew how critical a full-scale solution was. After our Customer Care team scheduled a home inspection, System Design Specialist Victor Tapia from our Sales Team visited the homeowner. They provided a thorough examination of the basement, spotting precisely where the water was seeping in. With this clear understanding, we proposed a comprehensive plan to not only address the current water entry but to prevent any future issues. The solution we prescribed was simple yet effective – complete the WaterGuard installation around the entirety of the basement perimeter and introduce the SaniDry Sedona to keep the humidity levels in check. The SaniDry Sedona is not just any dehumidifier; it's specially designed to handle the high demands of basement environments, ensuring the air stays dry and comfortable. Our production team, consisting of expert installers and foreman Mike Lyall, carried out the work efficiently. They were meticulous, ensuring that the installation was done right and that every inch of the basement was secured against potential water intrusion.
In the end, the homeowner was thrilled. Not only did we solve the immediate problem by stopping the water entry, but we also provided a lasting solution that secured their home against humidity and future water damage. This project in Bedford, NH, stands as a testament to our commitment to providing remarkable customer care and reliable solutions for every home's needs.
Recently, we had the pleasure of helping a homeowner in Bedford, NH, who was facing a pretty common yet frustrating problem - their pool deck started developing tripping hazards, with certain areas becoming uneven over time. Like anyone would, they wanted to ensure the safety and usability of their pool area. So, they reached out to Erickson Foundation Solutions to help find a mighty fix that wouldn't just be a temporary patch-up.
After contacting our Customer Care team, an appointment was made for a thorough inspection. Our System Design Specialist Victor Tapia visited the home, assessed the situation, and it was clear that the fluctuating underlay soil was the culprit. To resolve this, we recommended the installation of PolyLevel, a modern solution known for its durability and effectiveness in fixing uneven concrete surfaces by leveling them perfectly. Our production team swiftly got to work under the guidance of very experienced foreman Nick Melo. PolyLevel was injected beneath the troublesome areas of the pool deck, raising and leveling the slabs to their initial height and smoothness, effectively eliminating the tripping hazards. The precision, efficiency, and tidiness of our team's work left the homeowner amazed. The best part? The entire procedure was quick, minimum disturbance was caused to the daily routine of the household, and the cleanup was so thorough, the only evidence of our presence was the beautifully level and safe pool deck.
With the pool area now beautifully restored and hazard-free, the homeowner was beyond satisfied with the service received from Erickson Foundation Solutions. We made sure not just to fix a problem, but to ensure peace of mind, delivering on our mission to provide a remarkable customer experience and a reliable solution that’ll last for years to come.
When a homeowner in Bedford, NH, noticed the unsightly cracks and unevenness in their driveway, they knew it was time for a change – both for their home's curb appeal and their peace of mind. Tired of the poor aesthetics and potential tripping hazards, they reached out to us at Erickson Foundation Solutions for help.
Upon receiving their call, our friendly Customer Care team promptly scheduled a home inspection appointment, kicking off the journey to a revitalized driveway. When Victor Tapia, our System Design Specialist arrived, he conducted a thorough inspection, assessing the extent of the damage and determining the root causes. After the evaluation, he recommended a tailor-made solution he felt would not only address the homeowner's immediate concerns but provide a durable remedy for years to come. The proposal? A combination of our PolyLevel and NexusPro systems, designed for maximum effectiveness and minimal intrusion. Entering the scene with professionalism and expertise, our production team got to work swiftly. First, they used the PolyLevel injection system, a state-of-the-art method designed to lift and level the concrete by filling the voids beneath. This not only corrected the slump in the driveway but also provided a stable foundation to prevent future issues. Then, they applied NexusPro, a specialized sealant for the cracks, blending the repair seamlessly with the original concrete and warding off further deterioration.
As our team wrapped up, leaving the area clean and free of debris, the transformation was undeniable. The driveway now boasted a smooth, level surface, enhancing the home's overall look while eliminating safety hazards. The homeowner was thrilled with the outcome, appreciating not just the visible improvement, but the reassurance that their driveway was now as secure as it was aesthetically pleasing.
At Erickson Foundation Solutions, we recently took on a challenging yet rewarding job in Bedford, NH, aimed at helping a homeowner who was encountering an obstacle in their kitchen renovation process. The core of the issue? A sunken kitchen floor that needed stabilization before any cosmetic changes could be implemented. Understanding the importance of a solid and stable foundation, especially in areas as pivotal as the kitchen, the homeowners reached out to our team, hopeful for a solution that would not only address their immediate concerns but also safeguard their investment in the long run.
The process kicked off with a call to our dedicated Customer Care team, swiftly arranging for a home inspection to assess the extent of the problem. One of our knowledgeable System Design Specialists then conducted a thorough evaluation, identifying the root cause of the sunken floor and recommending the installation of SmartJack, our tried and true solution for such dilemmas. SmartJack is a comprehensive support system designed to effectively stabilize and lift sagging, uneven floors back to their original position. Not only does it offer an immediate rectification of the issue, but its durability assures the homeowner of long-term reliability, fitting perfectly with our mission of providing a remarkable customer experience complemented by enduring results. Our expert production team took the helm from there, meticulously installing the SmartJack system. Their professionalism and efficiency ensured the seamless execution of the project, while always maintaining a clean and unobtrusive presence in the homeowner's property.
The outcome? A beautifully leveled kitchen floor, ready to be the solid foundation of the homeowner's dream renovation. The homeowners expressed immense satisfaction, not just with the results, but with the seamless journey from diagnosis to resolution.
Val N. has lived in his Bedford, New Hampshire home for over 13 years. One day, when he was getting his home tested, it was pointed out to him that his chimney had started pulling away from his home. This, along with wall and settlement cracks can often go unnoticed or overlooked, especially if it is a very gradual process. With these cracks, sinking, and other signs becoming significantly more noticeable, Val wanted to take action to stabilize his home.
Our Design Specialist, Victor Tapia, recommended using Push Piers to uplift, level, and stabilize the foundation of his basement, ultimately providing support to the rest of the home. Often times, when a home's foundation is built on poor soil, voids can form underneath the settlement due to shifting of that soil, whether it be from erosion or other factors. This is what causes the home to sink, and that is when cracks and other signs become noticeable. To solve this problem, our team installed the Push Piers, which are drilled deep into the ground until they reach soil that can adequately support the foundation of the home. Once that is in place, these piers are attached to the settlement, and then further pushed down into the supportive soil. This lifts the slab and restores the sinking home.
With the Push Piers now rooted in durable soil, a permanent solution to the sinking home and chimney has been reached. Val was thrilled!
A home in Bedford, New Hampshire was placed on the market by the seller. A prospective buyer came in and put in an offer on the home pending a home inspection. The home inspector came in and performed a full inspection and report of the home. The report indicated that the foundation wall had some cracks that were concerning. The potential buyer recoiled and wanted to know more about issues with the foundation. To gain knowledge about the wall and some potential solutions the buyer and seller agreed to call EFS for a free inspection of the foundation of the home.
Our Design Specialist Jason Vachon met with the two parties and looked at the foundation of the home. Jason noticed the block foundation was bowing slightly and his recommendation was to install Geolocks on the foundation wall and have the other end installed in the yard to stabilize and straighten the foundation wall. The buyer and seller received the quote and worked out a deal between themselves for EFS to install our solution.
Our installation team began by marking where each of the 6 Geolocks would be installed on the bowing foundation wall. After the wall was marked our team started digging a trench 10 feet away from the foundation wall. This will allow us to the soil in between the foundation wall and the trench as leverage to stabilize and straighten the foundation wall. We then sent a galvanized rod through the foundation wall and into the trench. We attached a Geolock plate to either side of the rod and then began to tighten bolts on either side of the threaded rod to start straightening the foundation wall. Once straightened the team then backfilled the trench and tamped down the soil.
The buyer and seller were very impressed with the result of the project.
A homeowner in Bedford, New Hampshire had purchased their home two years ago. Since then, the basement has flooded three times - once in the first year and twice this past year. To prevent further flooding, the homeowner contacted Erickson Foundation Solutions for a free inspection of their basement. Victor Tapia, our Design Specialist, looked in the basement to find a solution to prevent further water intrusion and flooding. After the inspection, Victor recommended installing WaterGuard, Trench Drain, TripleSafe Sump Pump, IceGuard, and a buried exterior discharge line into the cellar.
Our installation team started by chipping out 185 feet of concrete around the basement's perimeter using a jackhammer. Then they dug down a few inches to accommodate our perimeter drainage into the trench. After that, they installed crushed stone and the drainage into the trench. In the basement's lowest point, our team removed enough concrete and dirt to install our basin for our TripleSafe. Once the basin was set, we plumbed the sump pump to the home's exterior where we installed our two IceGuards and 25 feet of Exterior Drainage Line. After setting up the exterior drainage, they mixed up concrete and covered the perimeter drainage around the sump pump with it to lock it into place.
The homeowners were happy with the installation of the perimeter drainage system in their basement. They no longer have to worry about that area flooding during periods of rain.
A homeowner in Bedford, New Hampshire recently bought their forever home. The house was built in 2000, and the homeowners noticed signs of water getting into the basement during the open house before they purchased it. After owning the home for a month, they decided to call EFS for a free inspection of their basement. Our Design Specialist, Isaac Hernandez, met with the homeowners to discuss their concerns and goals. After the conversation, Isaac inspected the basement to find a solution for their forever home. He recommended installing a perimeter drainage system to collect any water that enters the basement.
Our installation team, led by Gunther Billhardt, started by chipping out 50 feet of concrete along the back foundation wall to create a space for installing the perimeter drainage and sump pump. The team used a jackhammer to break up the concrete and installed 48 feet of WaterGuard into the trench.
Next, we installed our TripleSafe Sump Pump at one end of the drainage system to collect any water that the drainage might gather and send it outside the house. We also plumbed the sump pump outside the home, where we installed 2 IceGuards and buried 10' of Exterior Drainage Line directed away from the foundation.
After the exterior drainage was installed, our team returned to the basement to install the CleanSpace Wall System along the back foundation wall. The wall system collects water from the wall and guides it into the perimeter drainage and then into the sump pump. Our team also installed our SaniDry Sedona next to the TripleSafe.
Finally, the team mixed concrete and covered the perimeter drainage and around the TripleSafe to lock everything into place. The homeowners were thrilled with the project's results and relieved that they no longer had to worry about water entering their forever home's basement.
A homeowner in Bedford, New Hampshire has lived in their home for over 35 years. For years, they have experienced water entering their basement during heavy rainstorms. Typically, there would be a few wet spots on the basement floor, but this year they saw the basement flood twice with 3" of standing water. After experiencing two floods that required services from ServePro to drain all the water, the homeowners decided it was time to find a permanent solution. They reached out to EFS for a free inspection to prevent water from entering their basement.
Our Design Specialist, Josh Phillips, met with the homeowners and conducted a full inspection of the basement. After inspecting the basement, Josh recommended installing a full-perimeter drainage system that would collect any water from the walls or seep up from under the slab and pump it to the outside of the home.
Our Installation Team, led by Abdou Taal, began by chipping out over 100' of concrete around the perimeter of the basement for our WaterGuard perimeter drainage and TripleSafe sump pump. Once the concrete was removed and enough dirt was excavated for our drainage and sump pump to be installed, we began to lay the 135 feet of WaterGuard in the trench and link the drainage with our three-pump TripleSafe. After the pump and drainage were in place, the team plumbed the sump pump to the exterior of the home, where we installed two IceGuards and a buried exterior drainage line to carry water away from the foundation of the home. After installing the exterior drainage, the team returned to the basement to mix and pour concrete over the perimeter drainage and around the basin of the sump pump to secure everything in place. Lastly, we installed our SaniDry Sedona dehumidifier in the basement and connected the discharge line to the sump pump basin. The basement was now fully protected from water.
The homeowners were very satisfied with the installation of the perimeter drainage system and no longer had to worry about water collecting inside the basement.
This homeowner in Bedford, New Hampshire, has lived in their home for the past 40+ years. This year they had seen water in their basement of the early 1900s home for the first time ever. The homeowner called EFS for a free inspection and our Design Specialist Josh Phillips met with the homeowner and talked about their concerns and goals for the project. After his talk with the homeowners, he inspected the basement and then recommended installing a perimeter drainage system that included WaterGuard, a TripleSafe, an IceGuard, SaniDry Sedona, and an Exterior Drainage Line in the basement.
Our Installation team led by Gunther and Paul began by chipping out 30 feet of concrete so we could install our perimeter drainage and sump pump. Once the concrete was chipped and the debris was removed the team then installed the WG and TripleSafe. Next, the team plumbed the sump pump to the exterior of the home where we installed our IceGuard and EDL. This will carry the water away from the foundation of the home. After the drainage was installed, the team returned inside the basement and covered the WaterGuard and around the TripleSafe with concrete. After the concrete cures, the team installed the SaniDry Sedona into the basement to control the moisture in the basement.
The homeowner was very pleased with the results of the project.
A homeowner in Bedford, New Hampshire had lived in their home for 37 years without any water entering their basement. However, for the last three years, they have had to use a shop vac to clean up water after heavy rainstorms. Tired of this, the homeowner called EFS for a free inspection. Our Design Specialist, Anthony Brancato, met with the homeowner and created a solution to prevent water from collecting in their basement. The solution included 33' of WaterGuard, a TripleSafe, IceGuard, and 50' of Exterior Discharge Line.
Our Installation Team led by Steve Dumais began by chipping out concrete in the basement so we could install our perimeter drainage and sump pump. Once we chipped and dug out enough concrete and dirt the team was able to install the drainage and sump pump into the basement. Once in the basement, the team then plumbed the system to the exterior of the home where we installed the IceGuard and Exterior Drainage Line. After we installed the IG and EDL we buried the drainage line in the yard so we can carry water away from the foundation with little to no disruption. Then the team mixed up concrete and poured it over the WaterGuard and around the TripleSafe to lock them in place.
The homeowner was pleased with the results of the project. They no longer have to shop vac water out of the basement for hours.
A homeowner in Bedford, New Hampshire, had moved into their home 7 years and since they moved in they have seen water entering from one part of their basement. The homeowners were tired of cleaning up water from around their water heater and decided to call EFS for a free inspection. Our Design Specialist recommended installing 17' of WaterGuard, 20' of CleanSpace, and TrenchLock into the basement to stop water from collecting on the floor in the basement.
Our installation team began by chipping out the concrete on the wall and around the water heater. The team then installed CleanSpace along the wall before then installing the WaterGuard along the bottom of the wall. Once the WaterGuard was installed the team then installed the TrenchLock around the water heater. After the TrenchLock and WaterGuard were installed the team performed a water test before setting the drainage system in concrete.
The homeowners were very pleased this 7-year problem is now behind them.
A homeowner in Bedford, New Hampshire, had lived in their home for 40 years. When they moved into their 1940s home 40 years ago they had already seen water entering spots in the basement. Water has been entering the basement near the water heater. They have endured this issue for too many years and have finally decided they want the problems solved. They called EFS for a free inspection and our Design Specialist Victor recommended installing WaterGuard, TripleSafe, SaniDry, and IceGuard.
Our production team began by removing concrete along the wall near the water heater. We removed just over 30' of concrete from the base of the foundation wall so we could install our WaterGuard to collect any water that tries to enter the basement. In the corner of the basement, the team dug a basin to install the TripleSafe sump pump. The sump pump will collect any water from the WaterGuard and pump it outside of the home through the IceGuard and then through the exterior drainage line. To control the humidity in the basement the team installed a SaniDry. The team installed the SaniDry right next to the sump pump so they could install the drainage line straight into the basin.
The homeowners were very pleased with the results of the project. Erickson Foundation Solutions solved a 40-year issue in only a couple of days of work.
A new homeowner in Bedford, New Hampshire, recently had their home inspected and the inspector performed a radon test in their home. The test lasted for 97 hours and the average rating in the home was above 4.0 pCi/L. The homeowners decided to call EFS to have us install a radon mitigation system in their home. Our Design Specialist Jason design a radon system for their home.
Our production team began by creating an extraction point in the basement by creating a small hole in the slab. The team then attached a PVC pipe to the extraction point and lead that pipe to the exterior of the home where we connect the PVC pipe to the radon fan. The radon fan was installed on the side of the home and rest of the system was vented above the roofline of the home.
The homeowners were very pleased with the installation of the radon mitigation system in their home. The team completed the job within a couple of hours and made sure to leave the home cleaner than they found it.
A homeowner in Bedford, New Hampshire, has lived in their home for the past couple of months. Since moving into their late 70's home they noticed some cracking on the walls and floors of their garage. Because they just purchased the home a couple of months ago the homeowner would like to tackle any issues that pop up. The homeowners decided to call EFS for a free inspection, and our Design Specialist Victor found that the cracking in the garage was caused by pressure on the foundation wall. Victor recommended installing Geolocks, Crack Injection, and SmartJacks in the garage to add strength to the garage and repair the crack.
Our production team used Geolocks to use the soil from the front yard to stabilize the foundation wall. Next, the team injected the cracks in the garage with a crack injection to seal them. To add extra strength to the floors in the home our team installed 3 SmartJacks into the storage room off of the garage.
The homeowners were very pleased with the results. All of their concerns were repaired by EFS in only a couple of days. They were sure if they had any other problems with their home they would call EFS first to solve their problems.
A homeowner in Bedford, New Hampshire, had purchased their home in the last 6 months. Since moving in they have added a basketball court in their backyard but also have been using their basement more. While using their basement they have become concerned with radon. The homeowners decided to call EFS for a free inspection. Our Design Specialist Jason dropped off a test at the home to be reviewed after 48 hours. Once the test results were in Jason returned and discussed the results with the homeowners. The results in the basement averaged around 7 pCi/L which was higher than recommended. Jason recommended installing a radon mitigation system in the home.
Our production team installed a single extraction radon mitigation system into the home with a Fan Moisture Guard.
A homeowner in Bedford, New Hampshire, found water in their basement after a rainstorm dropped .7" of rain in 24 hours. The water was collecting at the bottom of the last step of the bulkhead. The homeowner lived in Florida during the winter and doesn't want to worry about water in the basement when they were in Florida. Our design specialist recommended installing a sump pump and a drainage system to collect and dispel the water.
Our Waterproofing team started by chipping out a trench for our TrenchLock and WaterGuard to sit in. The TrenchLock was installed in from of the bulkhead door and the water was installed on both sides of the door. Connected to the drainage system was the TripleSafe Sump, so if any water enters the TrenchLock or WaterGuard the TripleSafe will push the water out of the basement through the drainage line.
The homeowners were happy to know if any water enters the basement through the bulkhead that the drainage system and sump pump will collect the water and push it out of the basement. The homeowner now has peace of mind when they travel to Florida for the winter.
A homeowner in Bedford, New Hampshire, had concerns about the moisture in their crawlspace. They wanted to improve the efficiency of the insulation of their crawlspace. Our design specialist Victor examined and measured the crawlspace. Victor proposed a solution that would improve efficiency and address the moisture in the crawlspace. The solution was to install CleanSpace, Drainage Matting, and TerraBlock into the crawlspace.
Our production team first removed all debris from the crawlspace. Next, they installed Drainage Matting over the 320sqft of the crawlspace. This will allow air and water to travel under the matting without disturbing the crawlspace. Next, the team installed TerraBlock over the drainage matting and on the walls for added insulation. Following the TerraBlock, the team installed CleanSpace over the floors and walls of the crawlspace to create a vapor barrier where moisture and pests can't penetrate through. To finish the job the team installed an EverLast Door at the entrance to the crawlspace to create a physical door to close the space.
A homeowner in Bedford, New Hampshire, has a pool in their backyard that they love to use during the warmer months. Over the past 2 years, the homeowners have noticed some changes in the concrete around the pool. Some of the concrete slabs have raised and caused a tripping hazard. The homeowners have grandchildren that come over to use the pool. They want to have the concrete around the pool repaired. The homeowners decided to call EFS for a free inspection.
Design Specialist Michael LaMalfa inspected the pool deck. He found that most of the hazards are in the back right corner of the pool. There are a couple of slabs that have become uneven. Michael recommended fixing the back corner of the pool deck with PolyLevel.
Crew Lead Tyler Oslizlo and his team arrived at the home and injected PolyLevel under the affected slabs to level them.
This homeowner in Bedford, New Hampshire had been experiencing water coming up through cracks in the basement floor. The water collected in the basement whenever there was a rainstorm. The water is threatening to ruin the finished portion of the basement. The homeowners haven't been able to have their parents come to visit because the basement has an additional bedroom for guests. The homeowners would like to reclaim the functional space because the home is getting cramped. They decided to call EFS for a free inspection for homeowners.
Design Specialist Stephen Caron inspected the basement. During Stephen's inspection, he found cracks in the floor and a leak from an egress window. Stephen recommended installing a WellDuct Window Drain, WaterGuard, and a SunHouse Enclosure.
Crew Lead Ed Nadreau and his team installed the WellDuct Window Drain, 53' of WaterGuard, and the Sunhouse Enclosure.
This customer from Bedford, New Hampshire owns a warehouse that has some cracks in its walls. The cracks have been there since they purchased the warehouse. Water has been leaking through the wall and damaging products. The warehouse owner decided to call EFS for a free inspection.
Design Specialist Michael Bradley arrived at the warehouse and inspected the walls and foundation. He found the cracks that the owner was referring to. Michael recommended installing Crack Injection into each crack to seal them.
Crew Lead Nick Melo and his team arrived at the warehouse. The team sealed all of the cracks with Crack Injection.
This homeowner in Bedford, New Hampshire found during the sale process of their home that the foundation of the home was leaning. The homeowner decided to call EFS for a free inspection.
A design specialist arrived at the home and inspected the foundation. The specialist recommended installing 18 Geolocks in the home to rectify the home and stop it from leaning.
A team from EFS arrived at the home and installed 18 Geolocks into the home.
This homeowner in Bedford, New Hampshire was experiencing high radon levels in their home. The first alert self-test they conducted came back with a reading of 20.8 pCi/L. They decided to call EFS for a free inspection.
Design Specialist Michael LaMalfa arrived at the home and inspected the basement and designed a radon mitigation system.
Crew Lead Scott Crandall and his team arrived at the home and installed the radon mitigation system.
Richard S. of Bedford, New Hampshire has been living in his home for 14 years. Over the last 3 years, he has started to notice some changes to his pool deck. He noticed that near the stairs to enter his pool had started to sink. The sinking had created a tripping hazard that Richard would like repaired so his kid won't trip and hurt themselves. He decided to call Erickson Foundation Solutions to see if someone could come out and proposed a solution.
Design Specialist Jason Vachon arrived at the home and inspected the pool deck. He discovered that the concrete near the stairs was sinking because of the soil was washing away whenever it would rain. Jason proposed a solution to Richard. The solution was to inject PolyLevel under the slab that was settling to fill the void where the soil was washed away.
Project Manger Chris Hanulek and his team came to the home and injected PolyLevel under the settled slab. They were able to lift the slab back to its original position to diminish the tripping hazard.
Or call us at
1-855-239-3489
1-603-263-4404
Erickson Foundation Solutions
14 Clement Rd
Hudson, NH 03051
© 2024 Erickson Foundation Solutions | Privacy Policy | Terms of Use | Sitemap