Radon Gas Mitigation Before & After Photos

This homeowner in Bedford, New Hampshire, was interested in discussing a Radon Mitigation System to install in their home. The radon levels were tested around 2-3.5 pCi/l. The homeowners want to get that number even lower. Design Specialist Royce Potts came to the home and designed a radon mitigation system for their home. Crew Lead Brendan Edwards and his team came to the home and installed the new Radon Mitigation System and was able to lower the pCi/l.

A resident in Bedford, New Hampshire recently purchased their home. They had an inspector do a walkthrough of their home after the purchase. The inspector tested for radon in the home and the levels were above 4.0 pCi/L. The homeowners called EFS for us to install and set up an appointment with our Design Specialist and they designed a system for the home. Our team then installed the system in the home and retested the levels to make sure they were below 4.0 pCi/L. 

A new homeowner in Marlborough, Massachusetts just purchased their home. A radon test was performed after purchase during the inspection process. The test indicated the levels are 4.3 pCi/L and they would like to reduce the radon in their home. Design Specialist Michael Biedrzycki went to the home to talk to the homeowner about their options. Scott Crandall his team then installed the radon mitigation system into the home.

A homeowner in Marlborough, MA discovered a leak in their passive radon system emanating from the roof. Upon further examination, they retested their home for radon levels and found them to be at 18 pCi/L, significantly exceeding the safe limit of 4.0 pCi/L. Recognizing the danger posed by this harmful gas, they reached out to Erickson Foundation Solutions for assistance.

The installation of our radon mitigation system began with the creation of an extraction point in the foundation. We then secured PVC piping to this point and extended it to the outside of the house. On the exterior, a radon fan was installed to draw radon from the ground beneath the foundation. We added more PVC piping to the fan, extending it above the roofline to safely release the gas away from the house.

The homeowners were elated to have a durable, high-quality solution implemented.

This homeowner in Merrimack, New Hampshire had a radon test come back with levels at 9 pCi/l. They called Erickson Foundation Supportworks for someone to come to their home. Design Specialist Paul Magowan came to the home and inspected possible places to install the system. Paul would then design a radon system specifically for that home. After the design is made by Paul, he passed the design over to the Crew Lead Scott Crandall. Scott Crandall and his team would go to the house and install the custom radon mitigation system.