Erickson Foundation Solutions Before & After Photos

This homeowner recently purchased their home in Hudson, New Hampshire. During the pre-purchase inspection of their home, the inspector noticed some cracking in the foundation wall in the garage and the basement. They became worried about the cracks and called EFS for a free inspection. 

A design specialist inspected the garage and basement and found that the cracks are caused by hydrostatic pressure. The design specialist recommended installing PowerBraces against the wall and then sealing the cracks in the wall. 

A crew from EFS installed 2 PowerBraces and sealed the cracks. 

This homeowner in Hudson, New Hampshire, has high radon levels in their home. The homeowner had tested the basement for radon and the results were 40.05 pCi/L. They decided to call EFS for a free inspection. A Design Specialist inspected the home and designed a radon mitigation system to mitigate the radon in the home. The specialist system included 2 extraction points to allow for the most amount of radon to be mitigated. 

The radon crew from EFS installed a Radon Mitigation System with two extraction points.

This homeowner in Hudson, New Hampshire is planning on selling their home in the next year. They have a basement that the family uses very consistently. They have a few small fish tanks and a turtle pond in the basement. The radon levels were tested and found to be 3.8 pCi/L. They decided to call EFS for a free inspection. 

A Design Specialist inspected the home and created a plan to install a radon mitigation system into the home. 

The Radon Installation Crew installed the Radon Mitigation System into the home. 

A homeowner in Hudson, New Hampshire, had water entering their basement from a vertical crack in the foundation. Our production team installed FlexiSpan to seal the crack and guide water out of the basement. 

A homeowner in Hudson, New Hampshire, had lived in their home for the past 22 years. Over time the homeowner noticed some changes in the garage. They decided it was time to call EFS for a free inspection. Our design specialist recommended installing PolyLevel to fill the void underneath the garage slab. 

Our production team injected PolyLevel under the garage slab to stabilize the garage.