Erickson Foundation Solutions Before & After Photos

In Haverhill, MA, a homeowner was faced with the daunting problem of decaying brick support columns in their crawl space, a common issue that compromises structural integrity. As you can see in the before photo, these weakened supports were no match for the demands of the house they held up. With Erickson Foundation Solutions stepping in, we transformed this deteriorating space. Notice in the after photo how we replaced the old with new, sturdy SmartJacks, ensuring a strong, stable foundation that lasts. This is just one example of how we commit to providing a solution that not only fixes the problem but offers peace of mind and safety for years to come.

In Dighton, MA, a homeowner faced a persistent issue with water pooling in their driveway whenever it rained. Over time, this can deteriorate surface integrity, leading to more extensive damage. As you can see in the 'before' photo, proper water management was lacking. Erickson Foundation Solutions addressed this problem by installing a Spee-D Channel to efficiently redirect water runoff. Additionally, we applied NexusPro Joint Sealant, renowned for its robust, UV-resistant properties, which seals joints and prevents ground erosion. The 'after' photo reveals a well-protected and structurally sound driveway, offering a permanent solution.

This homeowner in Canton, MA was tired of having an unsightly tripping hazard on their stamped concrete patio. Over the years, the concrete had gradually been settling at one of the joints. The void beneath this section of the concrete needed to be filled in order to raise it back up. Tearing out and replacing a section of stamped concrete would be time consuming and costly, so our PolyLevel process was the ideal solution for this homeowner. The repairs took less than a day, and the homeowner was able to reuse their patio within minutes.  

After installation, the tripping hazard had vanished, and the joints were sealed to prevent further water from flowing beneath the slab.  The white resiude will be washed away and cleaned before our crew leaves for the day, leaving the homeowner with a fixed and clean patio.

A homeowner in Canton, Massachusetts had a pool deck with sinking concrete. This caused the pool deck to become uneven, creating tripping hazards. The homeowner didn't realize that this was an issue that could be fixed until learning about our PolyLevel product. Eager to have this quick and permanent solution installed, she reached out to Erickson Foundation Solutions.

Our Design Specialist, Jim Meglio, recommended installing PolyLevel and NexusPro to lift and level the aggregate concrete while also preventing cracks and settling in the future. Our installation crew injected the polyurethane foam underneath the slabs, which filled voids that had expanded over the years. With the voids filled, the concrete is instantly lifted, and our installation crew then levels the concrete. With the concrete adjusted, the plastic joint sealant strips had to be removed. We then installed NexusPro seal the joints.

The pool area is now a safe space with the concrete repair completed.

This home in North Andover, MA had a large crack in the foundation. The homewoners were concerned, so Erickson Foundation Supportworks sealed it with a polyurethane injection, a foam material that quickly expands within the crack and effectively seals it up. The pictures shown are the before and after of the crack.