Erickson Foundation Solutions Before & After Photos

A home in Milford, New Hampshire had concerns with their floors sagging in their home. We came out to the home and inspected the crawlspace where the sagging beam was located. The Design Specialist recommended supporting the beams with SmartJacks and then using TripleSafe and CleanSpace to control the levels of water and moisture in the crawlspace. 

A homeowner in Milford, New Hampshire lives in an older home and they were concerned with the floor system. They called EFS for a free inspection of their floor system and our Design Specialist recommended installing SmartJacks into the basement to add support to the floor system. 

This homeowner in Milford, NH was concerned with a crack they discovered in their basement foundation wall beneath a cast iron drainage pipe. The crack had been there for several years, however over the past year had started leaking small amounts of water. Not wanting the problem to get worse, they reached out to our Erickson team for a solution. 

Our design specialist, Anthony, was able to determine there was no movement or deflection in the concrete wall itself. The amount of water coming in through the crack also did not warrant a perimeter waterproofing system. The best solution for this type of crack was FlexiSpan crack seal. The homeowner was pleased with the proposal and explanation from Anthony, and hired our Erickson team for the repairs. Our service technician, Branden Edwards, completed the FlexiSpan installation in half a day, and also recommended a SaniDry dehumidifier for the basement since the humidity rating was above 70%.

After a clear design and installation process, and the crack being properly sealed, the homeowner was very pleased with the results. 

A homeowner in Milford, New Hampshire, recently became concerned with radon in their home. They tested their home and the results were above the recommended amount per the National Radon Defense. The homeowners called EFS for us to look at their basement and designed a radon mitigation system. Our installation team installed the radon mitigation system with 2 extraction points and sealed 25 feet of cracks in the slab to prevent radon from seeping through the cracks in the slab. 

A homeowner in Milford, New Hampshire, has lived in their home for over 10 years. They have been working out in the basement recently and have become concerned with radon being present down there. The homeowners called EFS for a radon test and our Design Specialist dropped off a CRM to test the levels in the basement. After the 48-hour test, the results came back averaging at 9.0 pCi/L. Our specialist then recommended installing a radon mitigation system in the home to reduce the radon levels. 

Our installation team arrived at the home and installed our single extraction radon mitigation system into the home. The system lowered the radon levels below the recommended amount of 4.0 pCi/L.