Nick has been a great addition to Erickson Foundation Supportworks and a solid member of our production team. In his free time he enjoys spending time with his daughter and snowmobiling in various spots around New Hampshire.
This homeowner in Rindge, New Hampshire wanted to stabilize their house and attached deck. Design Specialist David Cormier came out to the home and purposed that the homeowner uses helical piers. The Crew Lead Nick Carelli and his team came to the home and installed the piers.
This homeowner chose Erickson Foundation Supportworks to install a radon mitigation system. The installation process involved sealing some cracks within the foundation walls. Some of the cracks had been sealed previously, however were not done properly. This before and after highlights what we did to reseal a crack that was done incorrectly in the past by another company.
Crack monitors placed over the cracks also assist the homeowner determine if their walls shift or settle over time.
This homeowner in Pepperell, Massachusetts recently had their kids move out and are looking to downsize their home. To sell their home they are looking to fix any issue that would affect the value of the home. They wanted to fix a leak that they had in their basement. Design Specialist Royce Potts came to the home came up with options to seal the crack. Crew Lead Nick Carelli and his crew came to the home and fixed the cracks.
This homeowner had concerns with high radon levels and a high water table. Our team installed a radon mitigation system, as well as a sump pump with battery backup.
This homeowner in Tyngsboro, Massachusetts go their basement tested for radon. The test came back at 14.3 pCi/l and then retested in an alternate location at 12 pCi/l. Design Specialist Michael Bierdrzycki came to the home and proposed a radon mitigation system that would reduce the amount of radon in their basement to a healthy level. Crew Lead Nick Carelli and his team came to the home and had the radon system installed within a couple of hours.
This home in Chelmsford, MA had high a PCI/L level and needed a Radon Mitigation sytem installed. In the before photo you can see the home before the vent pipe and mitigation system were installed. The after photo shows the home after the vent pipe was installed.
This homeowner in Nashua, New Hampshire, was experiencing some sagging on the main level of their home. In their basement, they have some lally columns supporting the main beam then they have some 2x6 pieces of wood supporting another beam. They were looking to replace the pieces of wood with actual supports. Design Specialist David Cormier came to the home and inspected the basement and confirmed that they should replace the wooden supports for more advanced structural supports. He proposed to the homeowners installing SmartJacks. Crew Lead Nick Carelli and his crew installed two SmartJacks where the wooden supports were.
This homeowner in Nashua, New Hampshire was experiencing their cinder-block foundation around their garage starting to crumble. They didn't want to wait any longer to fix the issue so they call Erickson Foundation Solutions. Design Specialist John Prince came to the home and looked at the issues on their cinder-block foundation. John suggested to the homeowner they would benefit from having the Erickson team rebuilding their cinder-block foundation. Crew Lead Nick Carelli and his team came to the home, tore down the old cinder blocks, and rebuilt the foundation with new cinder blocks.
This homeowner was experiencing the concrete blocks around their bulkhead start to shift drastically. The blocks started to be pushed inward and were starting to let water in. Design Specialist Nate Erickson came out to the home and observed the affected areas of the home and concluded that the bulkhead needed to be redone. Nick Carelli and his team came to the home and rebuilt the block stairs that led up to the bulkhead from the basement. The team also installed a brand new bulkhead door.
This homeowner in New Boston, New Hampshire was experiencing water entering their basement through the bulkhead. Design Specialist John Prince came to the home and suggested waterproofing the bulkhead. Crew Lead Nick Carelli and his team came to the home and installed a waterproofing system on the bulkhead. They installed a waterproof barrier around the concrete bump-out that the bulkhead is resting on to ensure that no water can enter the basement through the bulkhead anymore.
This home in Lowell, MA was continuously getting a wet basement. Water was leaking in through the basement walls. Although there was a sump pump in place, the system wasn't properly catching all the water, nor was it homeowner friendly. An exposed pit with a pump is not an efficient system. Erickson Foundation Supportworks upgraded sump pump system, combined with a battery backup, is the complete, reliable system this homeowner deserved.
This homeowner in Manchester, New Hampshire, had a water leak in through the basement wall. Design Specialist John Prince came to the home and showed them how the team is going to the waterproof. Crew Lead Nick Carelli and his team came to the home and patched and waterproofed the crack.
A homeowner of 35 years in North Andover, Massachusetts had two radon tests done in their home by Erickson Foundation Supportworks. One test for each basement in their home. The tests came back with a pCi/l reading of 12 and 48 which are high. The homeowner would like to get these numbers below 4.0pCi/l which is the recommended amount.
John Prince the Design Specialist for Erickson Foundation Supportworks was able to design two systems for this home. Scott Crandall was the crew lead on this job and he and his team installed the two radon systems into this homeowner's home. The before and after photos show one of the radon systems that were installed. This one, in particular, was on the side of the house.
After both of the systems were installed the homeowner was very please that the pCi/l was under 4.0.
A potential homeowner looking in Kingston, New Hampshire found a house that they wanted to purchase but needed someone to replace the columns in the basement.
Dave Cormier was able to inspect the basement supports and suggested having Smart Jacks installed in the basement for support rather than a cut log and an old jack that wasn't supporting the structure anymore. Jon Provost, the crew lead, had his team remove the old support and replace them with Smart Jacks.
This potential homeowner was happy to know that the structure was now secured and that they wouldn't have more structural issues in the future.
This homeowner in Rochester, NH wished to install a raodn mitigation system. A portion of the basement floor was exposed crushed stone. In order for the system to operate effectively, this section needed to be permanently sealed. Cleanspace encapsulation was installed along with the radon mitigation system.