Concrete Leveling Before & After Photos

A homeowner in Cranston, Rhode Island was concerned with their concrete patio cracking and settling, creating tripping hazards. Noticing that the problem was getting worse, they wanted to lift and stabilize the concrete before further damage occurred.

Our Design Specialist, Jim Meglio, went to the home to conduct a free home inspection. After completing the inspection, he recommended installing PolyLevel to lift and level the sunken concrete. PolyLevel is a polyurethane foam used to fill voids between the soil and concrete. Our installation crew drilled tiny holes in the concrete in order to inject the foam. After lifting the concrete back to its original spot, NexusPro joint repair was used to seal the cracks. NexusPro stops water from making its way underneath the concrete, preventing shifting and cracking.

With the application of these products, the patio has become a safe and more visually appealing space.

In Paxton, MA, a homeowner faced sunken and cracked concrete slabs around their pool patio, disrupting both aesthetics and functionality. As you may observe in the photos, we expertly addressed this issue with the installation of our PolyLevel® system. This system effectively stabilized, lifted, and leveled the concrete slabs through precise high-strength polyurethane foam injection. To secure further against future damage, we applied NexusPro® Joint Sealant, sealing the joints and cracks neatly, ensuring lasting durability. Erickson Foundation Solutions deliver permanent, professional solutions to our clients' concrete challenges.

An autobody shop in Worcester, MA had been experiencing issues with cars entering and exiting the bays due to sinking concrete. Voids underneath the concrete had caused the concrete to sink, creating an uneven surface. This business reached out to Erickson Foundation Solutions to lift and stabilize the concrete.

Our Design Specialist recommended installing PolyLevel concrete leveling and NexusPro joint repair. PolyLevel is a polyurethane foam that is injected underneath the concrete to fill the voids and almost instantly create a level surface. This is a quick and permanent solution that costs a fraction of installing new concrete. Once the PolyLevel lifted the concrete, NexusPro was used to seal the joints between the concrete. NexusPro prevents water from invading the soil underneath the concrete, preventing concrete cracks or becoming uneven. It is resistant to UV rays to prevent the sealant from cracking, foaming, or drying.

With the concrete now lifted to its original placement, both employees and customers can rejoice that cars can easily make their way in and out of the bays. 

A homeowner in Attleboro, Massachusetts has been living with a sunken driveway since he purchased the home in 2005. Over time, settling caused the problem to worsen. Looking to lift and level the concrete, he reached out to Erickson Foundation Solutions.

Our Design Specialist recommended using PolyLevel to lift and level the concrete. This polyurethane foam is injected underneath the slabs to fill voids between the soil and concrete. After raising and leveling the concrete, NexusPro was used to seal the joints. NexusPro is the superior sealant due to its resistance to UV rays, preventing drying and bubbling. With the joints and cracks sealed, water is unable to get underneath the concrete, which can cause shifting and further cracking.

The homeowner was shocked that the concrete in his driveway rose up 3 inches. His driveway will now be permanently stabilized and level.

This section of concrete patio for this homeowner had cracked and settled 5 inches. Rather than completely tear out and replace the entire patio, or even sections like this, our team successfully installed PolyLevel to lift and level out the concrete slab. The results in this corner of the patio were outstanding! The patio went from being an unsightly trip hazard, to being raised up to level and safe. And no demolition required.