Radon Gas Mitigation Before & After Photos

This homeowner in Plaistow, New Hampshire has children that have recently settled in Texas. They would like to sell their home in Plaistow and move out to Texas to be near their kids. They wanted to do some inexpensive upgrades to their home to make sure they got top dollar when they decided to sell. One of the upgrades on the list was a radon mitigation system. The homeowners knew that there were moderately high radon levels in the home. They decided to call EFS for a free inspection. A couple of days before their appointment a representative from EFS arrived at the home to drop off a radon test. The test will examine the air for the next 48 hours and report on the radon levels in the home. 

Design Specialist Brian Swindell inspected the home for visible signs of radon, like small cracks in the wall or the slab. Brian had found some crack on the slab in the basement that would need to be sealed. Brian then went over the test results with the homeowners. The result of the radon test showed that the radon levels in the home are above 10 pCi/L. Brian recommended installing a radon mitigation system into the home to get the radon levels as low as possible. 

Crew Lead Dillon Kingsbury and his team installed the radon mitigation system into the home and sealed the cracks in the slab to ensure no radon can seep up through the floor. 

Alistair M. of Epping, New Hampshire had built his house 12 years ago and now is experiencing higher than average radon levels. Since building the house he has been keeping a watchful eye on the radon levels for the past 12 years. Now after all that time he wants a radon system installed to mitigate the radon in his basement. Design Specialist Jason Vachon came to the home and administered a radon test. The radon test came back at 5.2 pCi/L which is above the recommended amount. Jason proposed a radon mitigation system for the home. 

Crew Lead Branden Edwards and his team came to the home and installed a radon mitigation system.

Alistair was pleased with the results of the project. 

This homeowner in Medford, Massachusetts tested their home for radon and the test results came back at 3.5 pCi/l. They called Erickson to come out to their home. Design Specialist Jason Furrey came to the home and inspected where they could install the Radon Mitigation System. After Jason found a place for the system to be set up he passed the plan onto the crew lead, Scott Crandall. Scott Crandall and his team installed the Radon Mitigation System into the home. 

This homeowner in Medford, Massachusetts has a continuous radon monitoring device that gives radon readings continuously. The homeowner is very conscious of indoor air quality and would like to have peace of mind. The home was built in 1915. They decided to call EFS for a free inspection. 

Design Specialist Brian Swindell looked at the continuous radon monitor and inspected the rest of the home for potential foundation and basement issues. Brian recommended installing a radon mitigation system.

Crew Lead Dillon Kingsbury and his team arrived at the home and installed a new radon mitigation system. 

This homeowner in Medford, MA was worried about the radon levels in their home. They wanted to get an accurate test done so they called EFS and a Design Specialist to come out and set up a 2-day test in their basement. 

Design Specialist Kenny Calabrese arrived at the home after the 2-day test was complete to inspect the home. Kenny showed the results of the test to the homeowners. The test results came back at 4.0. The homeowners would like to get that number as low as they can. Kenny recommended installing a radon mitigation system in the home. 

Crew Lead Dillon Kingsbury and his team installed the radon mitigation system in the basement.