Erickson Foundation Solutions Before & After Photos

This homeowner in Arlington, Massachusetts got two tests done for radon. The test came back at 9 and 4 pCi/l which are above the recommended amount for radon. The homeowner decided to call the Erickson Foundation Supportworks to set up an appointment.

Jason Furrey is a Design Specialist at Erickson Foundation Supportworks; he came out to the homeowner's home and designed a radon system for the home. Jason passed the design to Scott Crandall, the Crew Lead for this project. Scott and his crew were able to install the Radon system into the home. They were able to reduce the radon levels to below 4.0 pCi/l. 

This homeowner in Arlington, Massachusetts had concerns about high radon levels that could affect the health of their family. The homeowner decided to test their basements radon levels; the levels came back at 4.5-5.5 pCi/l. Design Specialist Michael Biedrzycki visited the home to see where the best place to install a radon mitigation system would be. After finding out where the system will go, Crew Lead Scott Crandall and his team installed the radon mitigation system in one day. The homeowner was relieved when the system was installed and immediately started to lower the radon levels.

Tom A. of Arlington, Massachusetts has a fieldstone foundation that was crumbling, and wanted to know what options he had. Tom had called EFS to see if they could send out someone out to look at his home. Erickson Foundation Solutions sent out Design Specialist Michael Bradley to the home. Michael inspected the basement of the home and proposed a Poly Foam to coat the inside of the fieldstone foundation and then SmartJacks to add support to some of the older beams in the home. 

Crew Lead Spencer Ladd and his team came to the home and sprayed the foam and installed the new SmartJacks into the basement. After the project, Tom actually likes the look more with the white foam finish than the untouched fieldstone. 

The owner of a 2 family home in Arlington, Massachusetts, has seen water coming into their finished basement and doesn't want to have to repair the floor for a second time. The owner decided to call EFS for a free inspection of their basement. Our Design Specialist Keith recommended installing a WaterGuard system and a SuperSump into the finished portion of the basement to prevent water from entering the basement. 

A homeowner in Arlington, Massachusetts, had planned on finishing their basement but they have water that seeps into the basement periodically. They would like to solve the water issue before finishing their basement. So the homeowners called EFS to help them with their problem. Our Design Specialist recommended installing a perimeter drainage system into the basement to keep their basement dry all of the time.