Erickson Foundation Solutions Before & After Photos

A homeowner in Rye, New Hampshire, recently had their home tested for radon gas, revealing a level of 7 pCi/L. Since levels above 4 pCi/L necessitate the installation of a radon mitigation system, this finding was particularly alarming, given that the homeowner's daughter's bedroom is in the finished basement. To address this urgent health concern, they reached out to Erickson Foundation Solutions for the prompt installation of a radon mitigation system to protect their residence.

Our System Design Specialist, Liam FitzPatrick, recommended installing our radon mitigation system, along with our Erickson Care Club service.  The installation team began by creating an extraction point via a small circular cut in the basement's concrete floor for the radon mitigation system. They then attached a radon pipe to this point, extending it to the exterior of the home, where they mounted the radon fan on the side. They routed additional piping from the fan along the side of the house, extending it above the roof to avert radon re-entry. Following the operational integrity test of the fan, the homeowners were given a charcoal test kit to measure the radon levels after about one week.

The installation of the radon mitigation system has safeguarded this family from the hazardous gas.

When our team arrived in Rye, NH, we were faced with a problematic crawl space showing signs of moisture issues and decaying support posts, threatening the home's stability. As you can see in the before photo, the environment wasn't ideal. Fast forward to the solution - our installation of the SmartJack and CleanSpace technology, notably visible in the after photo, has entirely transformed the area. We also added a TripleSafe Sump Pump, ensuring a drier, more secure foundation beneath the home. This comprehensive approach has made the crawl space safer and more functional, aligning perfectly with our mission to deliver lasting solutions and a remarkable customer experience.

In Rye, NH, a homeowner faced issues with a sunken pool deck corner due to flooding, which compromised the soil supporting the area, leading to unsightly cracks. As you can see in the before photo, the problem required an immediate and effective solution. We at Erickson Foundation Solutions deployed our PolyLevel® system to stabilize, lift, and return the pool deck to its original height. Additionally, we applied NexusPro® Joint Sealant to seal the cracks, preventing future soil washout. This precise application ensures long-term stability and enhances the area’s durability, embodying our commitment to providing permanent solutions.

Several sections of the concrete surrounding this inground pool in Mattapoisett, MA were dealing with settlement concerns. This one section near the entrance to a patio area was a terrible trip hazard, with a one inch difference between two concrete slabs. Our team was able to lift the sunken concrete and remove the trip hazard, creating a safer environment for this homeowner.

This homeowner in Carver, MA was wanting to make repairs to their concrete pool deck since it was uneven and the cracks were full of weeds. Our team injected PolyLevel beneath the concrete to lift and stabilize the sinking areas. We also cleaned up all the cracks and joints, then sealing them with NexusPro to help protect against more rain water from flowing underneath the concrete, which would lead to more erosion and settlement. With the repairs all made, the homeowners had a much better looking pool patio that was both safe and protected for years to come.