Radon Gas Mitigation Before & After Photos

A homeowner in Milford, New Hampshire, recently became concerned with radon in their home. They tested their home and the results were above the recommended amount per the National Radon Defense. The homeowners called EFS for us to look at their basement and designed a radon mitigation system. Our installation team installed the radon mitigation system with 2 extraction points and sealed 25 feet of cracks in the slab to prevent radon from seeping through the cracks in the slab. 

This homeowner reached out to us here at Erickson to replace their failing radon mitigation system.

Radon Mitigation System in Thornton, NH. This homeowner got a test done for radon and the levels were high so he chose to get a Radon Mitigation System installed by Erickson Foundation Supportworks. The before picture shows the outside of the home before the system was installed. The after picture shows the system fully installed by Scott Crandall and the team. Now the homeowner's radon levels are below 4pCi/l. 

This homeowner in Amherst, New Hampshire reached out to Erickson Foundation Supportworks to talk about options for Radon Systems. The homeowners met with Design Specialist Paul Magowan on installing a Radon Mitigation System. After a date was set Scott Crandall and his crew went to the home and installed the Radon System. 

This homeowner in Amherst, New Hampshire, has been living in their home for 10 years. A radon test was done in the home and the results came back with levels between 4.5-9.5. Design Specialist Paul Magowan proposed to the homeowners to install a radon system. Crew Lead Scott Crandall and his team installed a radon mitigation system into the home that permanently reduced the radon in the home.